/**
 * @file	
 * @author	chipsea
 * @brief	
 * @version	0.1
 * @date	2020-11-30
 * @copyright Copyright (c) 2020, CHIPSEA Co., Ltd.
 * @note
 */


#ifndef BATTSERVICE_H
#define BATTSERVICE_H

#ifdef __cplusplus
extern "C"
{
#endif

/*********************************************************************
 * INCLUDES
 */

/*********************************************************************
 * CONSTANTS
 */

// Battery Service Get/Set Parameters
#define BATT_PARAM_LEVEL                0
#define BATT_PARAM_CRITICAL_LEVEL       1
#define BATT_PARAM_SERVICE_HANDLE       2
#define BATT_PARAM_BATT_LEVEL_IN_REPORT 3

// Callback events
#define BATT_LEVEL_NOTI_ENABLED         1
#define BATT_LEVEL_NOTI_DISABLED        2

// HID Report IDs for the service
#define HID_RPT_ID_BATT_LEVEL_IN        4  // Battery Level input report ID

#ifdef HID_VOICE_SPEC
#define GATT_DESC_LENGTH_UUID            0x3111 // Used with Unit percent
#endif


/*********************************************************************
 * TYPEDEFS
 */

// Battery Service callback function
typedef void (*battServiceCB_t)(uint8 event);

// Battery measure HW setup function
typedef void (*battServiceSetupCB_t)(void);

// Battery measure percentage calculation function
typedef uint8 (*battServiceCalcCB_t)(uint16 adcVal);

// Battery measure HW teardown function
typedef void (*battServiceTeardownCB_t)(void);

/*********************************************************************
 * MACROS
 */

/*********************************************************************
 * Profile Callbacks
 */


/*********************************************************************
 * API FUNCTIONS
 */

/*********************************************************************
 * @fn      Batt_AddService
 *
 * @brief   Initializes the Battery service by registering
 *          GATT attributes with the GATT server.
 *
 * @return  Success or Failure
 */
extern bStatus_t Batt_AddService( void );

/*********************************************************************
 * @fn      Batt_Register
 *
 * @brief   Register a callback function with the Battery Service.
 *
 * @param   pfnServiceCB - Callback function.
 *
 * @return  None.
 */
extern void Batt_Register( battServiceCB_t pfnServiceCB );

/*********************************************************************
 * @fn      Batt_SetParameter
 *
 * @brief   Set a Battery Service parameter.
 *
 * @param   param - Profile parameter ID
 * @param   len - length of data to right
 * @param   value - pointer to data to write.  This is dependent on
 *          the parameter ID and WILL be cast to the appropriate
 *          data type (example: data type of uint16 will be cast to
 *          uint16 pointer).
 *
 * @return  bStatus_t
 */
extern bStatus_t Batt_SetParameter( uint8 param, uint8 len, void *value );

/*********************************************************************
 * @fn      Batt_GetParameter
 *
 * @brief   Get a Battery parameter.
 *
 * @param   param - Profile parameter ID
 * @param   value - pointer to data to get.  This is dependent on
 *          the parameter ID and WILL be cast to the appropriate
 *          data type (example: data type of uint16 will be cast to
 *          uint16 pointer).
 *
 * @return  bStatus_t
 */
extern bStatus_t Batt_GetParameter( uint8 param, void *value );

/*********************************************************************
 * @fn          Batt_MeasLevel
 *
 * @brief       Measure the battery level and update the battery
 *              level value in the service characteristics.  If
 *              the battery level-state characteristic is configured
 *              for notification and the battery level has changed
 *              since the last measurement, then a notification
 *              will be sent.
 *
 * @return      Success or Failure
 */
extern bStatus_t Batt_MeasLevel( void );

/*********************************************************************
 * @fn      Batt_Setup
 *
 * @brief   Set up which ADC source is to be used. Defaults to VDD/3.
 *
 * @param   adc_ch - ADC Channel, e.g. HAL_ADC_CHN_AIN6
 * @param   minVal - max battery level
 * @param   maxVal - min battery level
 * @param   sCB - HW setup callback
 * @param   tCB - HW tear down callback
 * @param   cCB - percentage calculation callback
 *
 * @return  none.
 */
extern void Batt_Setup( uint8 adc_ch, uint16 minVal, uint16 maxVal,
                        battServiceSetupCB_t sCB, battServiceTeardownCB_t tCB,
                        battServiceCalcCB_t cCB );

/*********************************************************************
 * @fn          Batt_HandleConnStatusCB
 *
 * @brief       Battery Service link status change handler function.
 *
 * @param       connHandle - connection handle
 * @param       changeType - type of change
 *
 * @return      none
 */
void Batt_HandleConnStatusCB( uint16 connHandle, uint8 changeType );

/*********************************************************************
*********************************************************************/

#ifdef __cplusplus
}
#endif

#endif /* BATTSERVICE_H */