WorkCodes/CST92F25_SDK_V1.4/Software/BLE/components/driver/uart/uart.h

/**
 * @file	uart.h
 * @author	chipsea
 * @brief	
 * @version	0.1
 * @date	2020-11-30
 * @copyright Copyright (c) 2020, CHIPSEA Co., Ltd.
 * @note
 */

/*******************************************************************************
* @file		uart.h
* @brief	Contains all functions support for uart driver
* @version	0.0
* @date		19. Oct. 2017
* @author	qing.han
* 

*
*******************************************************************************/
#ifndef __UART_H__
#define __UART_H__

#ifdef __cplusplus
extern "C" {
#endif
	
#include "types.h"
#include "gpio.h"

#define UART_TX_FIFO_SIZE    16
#define UART_RX_FIFO_SIZE    16

#define TX_FIFO_MODE    1
#define RX_FIFO_MODE    2
#define TX_RX_FIFO_MODE 3

#define FIFO_MODE 0//TX_RX_FIFO_MODE  //0

#define FCR_RX_TRIGGER_00 0x00
#define FCR_RX_TRIGGER_01 0x40
#define FCR_RX_TRIGGER_10 0x80
#define FCR_RX_TRIGGER_11 0xc0
#define FCR_TX_TRIGGER_00 0x00
#define FCR_TX_TRIGGER_01 0x10
#define FCR_TX_TRIGGER_10 0x20
#define FCR_TX_TRIGGER_11 0x30
#define FCR_TX_FIFO_RESET 0x04
#define FCR_RX_FIFO_RESET 0x02
#define FCR_FIFO_ENABLE   0x01


#define IER_PTIME   0x80
#define IER_EDSSI   0x08
#define IER_ELSI    0x04
#define IER_ETBEI   0x02
#define IER_ERBFI   0x01

/*LSR 0x14*/
#define LSR_RFE		0x80
#define LSR_TEMT	0x40
#define LSR_THRE	0x20
#define LSR_BI		0x10
#define LSR_FE		0x08
#define LSR_PE		0x04
#define LSR_OE		0x02
#define LSR_DR		0x01

/*USR 0x7c*/
#define USR_RFF   0x10
#define USR_RFNE  0x08
#define USR_TFE   0x04
#define USR_TFNF  0x02
#define USR_BUSY  0x01

#define UART_FIFO_RX_TRIGGER	FCR_RX_TRIGGER_10//FCR_RX_TRIGGER_10//FCR_RX_TRIGGER_11
#define UART_FIFO_TX_TRIGGER	FCR_TX_TRIGGER_00//FCR_TX_TRIGGER_00//FCR_TX_TRIGGER_01

typedef enum{
	 UART0=0,          //use uart 0
	 UART1=1,          //use uart 1
}UART_INDEX_e;

enum UARTIRQID{
	NONE_IRQ = 0,
	NO_IRQ_PENDING_IRQ = 1,
	THR_EMPTY = 2,
	RDA_IRQ = 4,
	RLS_IRQ = 6,
	BUSY_IRQ = 7,
	TIMEOUT_IRQ = 12,
};

enum{
  TX_STATE_UNINIT = 0,
  TX_STATE_IDLE,
  TX_STATE_TX,
  TX_STATE_ERR
};

typedef struct _uart_Evt_t{
  uint8_t   type;
  uint8_t*  data;
  uint8_t   len;
}uart_Evt_t;


typedef enum{
  UART_EVT_TYPE_RX_DATA = 1,
  UART_EVT_TYPE_RX_DATA_TO, //case rx data of uart RX timeout
  UART_EVT_TYPE_TX_COMPLETED,
} uart_Evt_Type_t;

typedef void (*uart_Hdl_t)(uart_Evt_t* pev);

typedef struct _uart_Cfg_t{
	GpioPin_t  tx_pin;
	GpioPin_t  rx_pin;
	uint32_t    baudrate;
	bool        use_fifo;
	bool        hw_fwctrl;
	bool        use_tx_buf;
	bool        parity;
	uart_Hdl_t  evt_handler;
}uart_Cfg_t;

typedef struct _uart_spi_t{
	UART_INDEX_e uart_index;	
}uart_t;


typedef struct _uart_Tx_Buf_t{
	uint8_t   tx_state;
	uint16_t  tx_data_offset;
	uint16_t  tx_data_size;
	uint16_t  tx_buf_size;
	uint8_t*  tx_buf;
}uart_Tx_Buf_t;


ErrCode_t HalUartInit(UART_INDEX_e uart_index, uart_Cfg_t cfg);
ErrCode_t HalUartDeInit(UART_INDEX_e uart_index);
ErrCode_t HalUartRegister(UART_INDEX_e uart_index, uart_Hdl_t cb);
ErrCode_t HalUartUnRegister(UART_INDEX_e uart_index);
ErrCode_t HalUartGetTxReady(UART_INDEX_e uart_index);
ErrCode_t HalUartSetTxBuf(UART_INDEX_e uart_index, uint8_t* buf, uint16_t size);
ErrCode_t HalUartSendByte(UART_INDEX_e uart_index, unsigned char data);
ErrCode_t HalUartSendBuf(UART_INDEX_e uart_index, uint8_t *buff, uint16_t len);
void HalUartBaudSet(UART_INDEX_e uart_index, uint32 baud);
ErrCode_t HalUartGetBusy(UART_INDEX_e uart_index);

void __ATTR_SECTION_SRAM__ HalUart0IRQHandler(void);
void __ATTR_SECTION_SRAM__ HalUart1IRQHandler(void);

#ifdef __cplusplus
}
#endif


#endif