#ifndef		__BSP_SPI_MASTER_H_
#define		__BSP_SPI_MASTER_H_

#define		FLASH_PAGE_SIZE			256	
#define		FLASH_BLOCK_SIZE		65536
#define		FLASH_SECTOR_SIZE		4096


#define     SPIM_CLK_1MHZ           32            
#define     SPIM_CLK_2MHZ           16
#define     SPIM_CLK_4MHZ           8
#define     SPIM_CLK_8MHZ           4
#define     SPIM_CLK_16MHZ          2     


extern  void	Init_spi_master(uint32_t ch, uint32_t freq);
extern  void	spi_flash_Read_Page(uint32_t	PageAddR, uint8_t *buff);
extern  uint8_t	spi_flash_wait_till_ready (void);
extern	void	spi_flash_chip_erase(void);
extern	uint32_t	spi_flash_block_num(uint32_t	size);
extern	void	spi_flash_block_erase(uint32_t	blknum);
extern	void	spi_flash_write_enable(void);
extern	void	spi_flash_write_page(uint32_t	PageAddR, uint8_t *buff);
extern	void	spi_flash_sector_erase(uint32_t	no);
extern	void	spi_flash_Release_powerdown(void);
extern	void	spi_flash_Enter_powerdown(void);
extern  uint16_t    spi1_write_read_uint16(uint16_t    val);
extern  void    spi1_write_read_stream(uint16_t *input, uint16_t *output, uint16_t length);
extern  void	spi_flash_Read(uint32_t	ReadAddR, uint8_t *buff,uint16_t  ReadLength);
extern  void	spi_flash_write(uint32_t	WriteAddR, uint8_t *buff,uint16_t WriteLength);
extern  void spi_flash_Read_128bitsID(uint8_t *buff);

/*--------------------------------------------------------------
for Example:
-----------
	for(i=0; i<256; i++) {
		data_buff[i] = i;
	}
	spi_flash_write_enable();
	spi_flash_block_erase(0);
	while(spi_flash_wait_till_ready());

	spi_flash_write_enable();
	spi_flash_write_page(3, &data_buff[0]);
	while(spi_flash_wait_till_ready());

	for(i=0; i<256; i++)	{
		data_buff[i] = 0;
	}
	spi_flash_Read_Page(3, &data_buff[0]);
--------------------------------------------------------------*/


#endif