#include <stdarg.h>
#include "yc11xx.h"
#include "yc11xx_uart.h"
#include "yc11xx_gpio.h"
#include "btreg.h"
#include "yc11xx_spi.h"

//#define SEND_DEBUG
//#define updata_connecnt_param_test
#define ble_handle 0x0006
#define indicate_enable1 0x0007
#define indicate_enable2 0x0013
#define adv_len 19

#define IO_TXA  28
#define IO_RXA  25
#define IO_TXB  6
#define IO_RXB  25
#define UARTBUFSIZE 128

//void delay(uint16_t X)
//{
//	int i,j;
//	for(i=0; i<X;i++)
//	for(j=0 ;j<X ;j++);
//}




/*UART init*/
void UartxInit(USART_TypeDef UARTx)
{
	USART_InitTypeDef USART_InitStruct ;
	
	USART_InitStruct.USART_BaudRate = UARTE_BAUDRATE_BAUDRATE_Baud115200;
	USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
	USART_InitStruct.USART_WordLength = USART_WordLength_8b;	//USART_WordLength_8b
	USART_InitStruct.USART_StopBits = USART_StopBits_1;
	USART_InitStruct.USART_Mode =USART_Mode_duplex;
	USART_InitStruct.USART_Parity = USART_Parity_Even ;				// USART_Parity_Even
	USART_InitStruct.USART_RXLen = UARTBUFSIZE;
	USART_InitStruct.USART_TXLen = UARTBUFSIZE;

	if(UARTA == UARTx)
	{
		GPIO_SetGpioMultFunction(IO_TXA,GPCFG_UART_TXD);
		GPIO_SetGpioMultFunction(IO_RXA,GPCFG_UART_RXD);
	}
	else if (UARTB == UARTx)
	{
		GPIO_SetGpioMultFunction(IO_TXB,GPCFG_UARTB_TXD);
		GPIO_SetGpioMultFunction(IO_RXB,GPCFG_UARTB_RXD);
	}

	USART_Init(UARTx,&USART_InitStruct);
}





int main(void)
{
  int i;
  uint32_t temp=0;
  UartxInit(UARTA);
	uint8_t Writebuffer[3]={1,2,2};
	uint8_t Readbuffer[3]={0};
  SPI_FLASH_Init();
 	Soft_Flash_chipErase(0x00);
	 Soft_SPIFlashRead(Readbuffer, 0x00, 3);
		for(i=0;i<3;i++)
	{
 
		printf("%d\n",Readbuffer[i]);
	}
 	Soft_SPIFlashPageWrite(Writebuffer, 0x00, 3);
  Soft_SPIFlashRead(Readbuffer, 0x00, 3);
	for(i=0;i<3;i++)
	{
 
		printf("%d\n",Readbuffer[i]);
	}
	  temp=Soft_SPIFlashIDRead();
	  printf("flashID:0x%06x\n",temp);
   while(1)
	 {

	 }

	
	
}