#include <stdarg.h>
#include "yc11xx.h"
#include "yc11xx_uart.h"
#include "yc11xx_gpio.h"
#include "yc_timer.h"
#include "ipc.h"
#include "yc_lpm.h"
#include "system.h"
#include "yc11xx_bt_interface.h"
#include "att.h"
#include "core_cm0.h"
#include "yc11xx_pwm.h"
#include "user_driver.h"
#include "Drv_adc.h" 
#include "yc11xx_gpio.h"
#include "yc11xx_qspi.h"
#include "LH_TaskManager.h"
#include "u_main.h"
#include "yc11xx_wdt.h"
#include "user_driver.h"
#include "u_main.h"
#include "u_ble.h"
#include "drv_ota.h"

#define LED_GPIO	28
#define adv_len 30

BleRecv_t BleRecDataMsg={0};
	
void Bt_NecCallBack(uint8_t len,uint8_t *dataPtr);

#define IO_TXA  6  		//暂时没有用到 定义一个没有硬件的io 
#define IO_RXA  20		//暂时没有用到 定义一个没有硬件的io 

BLE_STATE gBLEState;

void Bt_init()
{
	gBLEState.topState = BLE_IDLE;
	gBLEState.secondState = BLE_IDLE;
}


void Bt_setBLEState(uint8_t inState)
{
	switch (inState){
		case BLE_IDLE:
		case BLE_ADV:
		case BLE_CONNECTED:
		case BLE_CONNECTING:
		case BLE_DIRECT_ADV:
		case BLE_PAIRED:
			gBLEState.topState = inState;
		default:
			break;
	}
}
void BT_OTA_Sleep_func(int i){
	Lpm_unLockLpm(OTA_UPDATE_FLAG);	
}
void Bt_lpm_enable(int none){
	Lpm_unLockLpm(CONNECT_WAKE_FLAG);
}
void Bt_StartAdv(int time_10ms,uint16_t gap){
	Bt_setBLEState(BLE_ADV);
	Bt_SetLeAdvInterval(gap);//设置广播间隔
	Lpm_Set_Interval(gap);
	Bt_SndCmdLeStartAdv();
}
void Bt_EvtCallBack(uint8_t len,uint8_t *dataPtr)
{
	BLE_Conn_param Ble_Conn_Param;
	switch(*dataPtr)
	{	
		case IPC_EVT_LE_DISCONNECTED:		//断连
			u_gapc_disconnect_cd(IPC_EVT_LE_DISCONNECTED);
			gBLEState.topState = BLE_IDLE;
		  Bt_CONNECTED_State=0;
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n***************IPC_EVT_LE_DISCONNECTED***************\r\n");
			#endif
			Bt_StartAdv(60,0x80);
			break;
		case IPC_EVT_LE_CONNECTED:			//连接
			Bt_CONNECTED_State=1;
			IPC_TxControlCmd(IPC_CMD_UPDATE_CONN);
			//SYS_ReleaseTimer(&gAdv_Timer);
		  Bt_SndCmdLeUpdateAttMTU();
	  	u_gapc_connection_cd();
			Lpm_unLockLpm(ADV_FLAG);
			Lpm_LockLpm(CONNECT_WAKE_FLAG);
			Bt_setBLEState(BLE_CONNECTED);
			UserTimerTask_Create((void*)Bt_lpm_enable,400);
		//SYS_SetTimer(&gConnect_Timer,400,TIMER_SINGLE|TIMER_TYPE_BIT,Bt_lpm_enable); 
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n***************IPC_EVT_LE_CONNECTED***************\r\n");
			#endif
			break;
		case IPC_EVT_BB_CONNECTED:
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n****************IPC_EVT_BB_CONNECTED*****************\r\n");
			#endif
			break;
		case IPC_EVT_SETUP_COMPLETE:
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n****************IPC_EVT_SETUP_COMPLETE*****************\r\n");
			#endif
			break;
		case IPC_EVT_BT_PAIRING_SUCCESS:
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n****************IPC_EVT_BT_PAIRING_SUCCESS*****************\r\n");
			#endif
			break;
		case IPC_EVT_LINKKEY_GENERATE:
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n****************IPC_EVT_LINKKEY_GENERATE*****************\r\n");
			#endif
			break;
		case IPC_EVT_RESET:	//上电
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n****************IPC_EVT_RESET*****************\r\n");
			#endif
			break;
		case IPC_EVT_WAKEUP:		//唤醒
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n****************IPC_EVT_WAKEUP*****************\r\n");
			#endif
			OS_EXIT_CRITICAL();		
			break;
		case IPC_EVT_LE_TK_GENERATE:
			#ifdef DEBUG_DRV_BT
			MyPrintf("\r\n****************IPC_EVT_LE_TK_GENERATE*****************\r\n");
			#endif			
			break;
		
		case IPC_EVT_LE_DISCONNECTED_ABNORMAL:
				#ifdef DEBUG_DRV_BT
				MyPrintf("\r\n******************IPC_EVT_LE_DISCONNECTED_ABNORMAL******************\r\n");
				#endif
				break;
		default:
			break;
	}
	return;
}

#define ATT_WRITE_REQUEST 0x12
#define ATT_PREPARE_WRITE_REQUEST	0x16
#define ATT_WRITE_COMMAND 0X52
void Bt_SndWriteResponse()
{
	IPC_TxControlCmd(IPC_CMD_SEND_WRITE_RESPONSE);
}

void Bt_BleCallBack(uint8_t len,uint8_t *dataPtr)
{
	uint16_t handle=0;
	uint8_t opcode=0;
	opcode = dataPtr[0];
	handle = dataPtr[1] +(dataPtr[2]<<8);
	switch(opcode) 
	{
		case ATT_WRITE_REQUEST:
			switch(handle)
			{
				case 0x0004:
					break;
				case 0x000e:
					break;
				case 0x0011:
					break;
			}
			Bt_SndWriteResponse();
			
			 break;
		case ATT_PREPARE_WRITE_REQUEST:
			switch(handle)
			{
				case 0x001c:
					break;
			}			
			 break;
		case ATT_WRITE_COMMAND:	
			switch(handle)
			{
				case OTA_BLE_WRITE_HANDLE:			//ota write handle
				Lpm_LockLpm(OTA_UPDATE_FLAG);		//停止进入休眠 
				Bt_BleOTA(len-1, dataPtr+1);			//ota 升级
				//SYS_SetTimer(&OTA_sleep_timer,50,TIMER_SINGLE|TIMER_TYPE_BIT,BT_OTA_Sleep_func);
				UserTimerTask_Create((void*)BT_OTA_Sleep_func,50);
				break;			
				case 0x001c:
				{
					/*app通过ble发的数据串口打印出来*/
					if((len-3)<=20)
					{
						memcpy(BleRecDataMsg.recv_data,dataPtr+3,len-3);
						BleRecDataMsg.recv_len=len-3;
					//Bt_SndBleData(BLE_SEND_HANDLE,BleReDataBuf,BleCntData);
					}else
					{
					  memcpy(BleRecDataMsg.recv_data,dataPtr+3,20);
						BleRecDataMsg.recv_len=20;
					}
					//	UserSet_OutPWM(0,PWM_CHANNEL_0,20000,BleRecDataMsg.recv_data[0]);// G	
					u_ble_data_recv(BleRecDataMsg.recv_data,BleRecDataMsg.recv_len);     
				}
				break;
			}	
				break;
	}
}



tIPCHandleCb gTIPCHandleCb[IPC_TYPE_NUM]=
{
	0,
	IpcDefaultCallBack,//cmd
	Bt_EvtCallBack,//evt					//evt回调函数，函数在drv_bt.c实现
	IpcDefaultCallBack,//hid
	IpcDefaultCallBack,//spp
	Bt_BleCallBack,//ble					//ble data回调函数，函数在drv_bt.c实现 
	IpcDefaultCallBack,//24g
	IpcDefaultCallBack,//mesh
	IpcDefaultCallBack,
	IpcDefaultCallBack,//mesh
	IpcDefaultCallBack,//a2dp
	IpcDefaultCallBack,//hfp
	#if (NEC_ENABLE==1)
  Bt_NecCallBack
	#else 
	IpcDefaultCallBack
  #endif
};



void Bt_Reset()
{
	uint8_t advD[22] = {0x02,0x01,0x06,0x05,0x03,0x12,0x18,0x0f,0x18,0x03,0x19,0x80,0x01,0x08,0x09,0x31,0x31,0x58,0x58,0x42,0x4c,0x45};
	//uint8_t addr[6]  = {0xF3,0xF2,0xF1,0xF0,0x06,0x06};
	
	uint8_t name[] = {"Smart Light"};//Light Life
	Bt_Renew_Le_AdvData(advD,22);
	#if (userset_mac_en==1)
	uint8_t addr[6]  = {0xac,0x02,0x88,0x11,0x43,0Xac};//官方代码mac地址
 	Bt_SetLeMac(addr);									//设置蓝牙地址 
	#endif
	Bt_Re_LeAdvName(name,sizeof(name));
	Bt_Re_LeDeivcename(name,sizeof(name));			
	Lpm_Set_Conn_Interval(0x1a0);
	Bt_SetLocalMtuSize(200);
	Bt_StartAdv(100,80);
}


int main(void)
{
	if(HREAD(mem_wake_flag)==POWERON_WAKE)
	{
			//初始化蓝牙回调函数
			IPC_init(&gTIPCHandleCb);			
			//初始化定时器
			SYS_TimerInit();
			printport_init();//初始化UARTB
			// BLE profile init.
			Att_profile_Config();
			//clos lpm
			Lpm_exit();	
			//init
			Bt_Reset();	
	}
	else
	{
		SysTick_Config(SYSTEM_CLOCK/100); 
	}
	//SYS_ClkTicks();
	HWRITE(mem_le_adv_led,1);//解除gpio0的系统占用  解决官方代码bug 
	GPIO_SetOut(GPIO_0,OUT_LOW);//同时将io 输出低电平 上电熄灭灯 
	GPIO_SetOut(GPIO_25,OUT_LOW);
	GPIO_SetOut(GPIO_24,OUT_LOW);
	#ifdef DEBUG_DRV_APP
	MyPrintf("\r\n****************RESET_BOOT*****************\r\n");
	#endif
  Audio_sampling_init();	
	u_init();
	TaskManager_Init();
	#ifdef HW_WATCH_DOG_FUNC
	WDT_Enable();//开启看门狗 
	#endif
	#ifdef DEBUG_DRV_APP
	MyPrintf("\r\nOTA_VERSION_Dev\r\n");
	MyPrintf("\r\nRUN_ADDR:%x\r\n",Get_runAddr());
	#endif
	while(1)
	{
		#ifdef HW_WATCH_DOG_FUNC
		WDT_Kick();//喂狗 
		#endif
		ag_timer_sched();//定时轮询
		TaskManager_Run();//任务调度器运行
		Audio_to_uart_start();
		switch (HREAD(IPC_MCU_STATE))
		{
			case IPC_MCU_STATE_RUNNING:
			{
				IPC_HandleRxPacket();						//m0和bt交互数据类型判断，是evt还是ble data？并执行对应回调函数
				//SYS_timerPolling();//定时器任务轮询 
				Lpm_LockLpm(M0_LPM_FLAG);			
				
			}				
			break;
			case IPC_MCU_STATE_LMP:			//lpm
			{
				if (IPC_IsTxBuffEmpty())
				{
					OS_ENTER_CRITICAL();
					Bt_ActionBeforeLpm();
					HWRITE(IPC_MCU_STATE,IPC_MCU_STATE_STOP);
				}
				else{
					HWRITE(IPC_MCU_STATE,IPC_MCU_STATE_RUNNING);
				}
			}
			break;
			case IPC_MCU_STATE_HIBERNATE:		//	HIBERNATE
			{
				OS_ENTER_CRITICAL();
				Bt_ActionBeforeHibernate();
				HWRITE(IPC_MCU_STATE,IPC_MCU_STATE_STOP);
			}
			break;
			case IPC_MCU_STATE_STOP:
			break;
		}

		
	}
}