//#include "driver_gpio.h"
//#include "Driver_uart.h"
//#include "le_gap.h"
#include "u_main.h"
#include "u_time.h"
#include "t_lev_decode.h"
#include "u_pwm_drive.h"
#include "u_effect_normal.h"
#include "u_app_handler.h"
#include "u_effect_rhythm.h"
#include "u_light_ctrl.h"
#include "u_power.h"
#include "u_rc.h"
#include "Drv_mic.h"

LightPara_t g_light_para = {0x00};
//extern void delay_ms(unsigned int tt);

/******************  判断是否带麦************************/

void mic_estimate_gpio_int(void)
{
	#if (firmware_is_mic==1)
	g_light_para.mic=1;
	#else
	g_light_para.mic=0;
	#endif
//	GPIO_config(2,2,0);
//	GPIO_config(3,1,2);	
//	delay_ms(1);
//	if( gpio_input(2,2) ==0)
//	{
//		g_light_para.mic=0;

//	}else
//	{
//		g_light_para.mic=1;
//	}
}
/******************************************/
void ag_timer_glo_task_cb(void)
{
	//sys_event_sched();
	if (g_ir_recv_done_flag == 1)
	{
		//红外接收
		g_ir_recv_done_flag = 0;
		
		ir_decode(rc_decode());
		#ifdef DEBUG_DRV_APP
		U_UART_PRINTF("ir_code = %02X, %02X, %02X, %02X\n", g_ir_code[0], g_ir_code[1], g_ir_code[2], g_ir_code[3]);
		#endif
	}
}

void ag_timer_test_cb(void)
{
	static uint8_t s_run_cnt = 0;
	s_run_cnt = s_run_cnt % 3;
	++s_run_cnt;
	switch (s_run_cnt)
	{
		case 0:
			light_set_color(0x00FF00);
			break;
		case 1:
			light_set_color(0x0000FF);
			break;
		case 2:
			light_set_color(0xFF0000);
			break;		
		default:
			break;
	}
	
}

/********************* 连接 断开 回调 ***********************/
#if 1
//蓝牙连接成功回调
void u_gapc_connection_cd(void)
{
	#ifdef DEBUG_DRV_APP
	U_UART_PRINTF("gapc_connect\n");
	#endif
//	if (g_light_para.app_seting & 0xF0)
//	{
//		light_power_set(GLO_EN);
//	}
	u_ag_timer_stop(AG_TIMER_ID_FLASH_SAVE);
}

//蓝牙连接断开回调
void u_gapc_disconnect_cd(uint8_t reason)
{
	#ifdef DEBUG_DRV_APP
	U_UART_PRINTF("gapc_disconnect = %d\n", reason);
	#endif
//	if (g_light_para.app_seting & 0x0F)
//	{
//		light_power_set(GLO_DIS);
//	}
	light_info_save();
	u_ag_timer_start(AG_TIMER_ID_FLASH_SAVE, TIMER_TIME_FLASH_SAVE, light_flash_save_cb);

}
#endif 

void u_rhythm_timer_ctrl(uint8_t timer_en)
{
	if (timer_en)
	{
		if(g_light_para.mic_AppOrDriver == 0)
		{
			u_ag_timer_start(AG_TIMER_ID_RHYTHM, TIMER_TIME_RHYTHM, rhythm_timer_cd);
			
		}else if(g_light_para.mic_AppOrDriver == 1)
		{
			DRV_Mic_Enable();
		  u_ag_timer_start(AG_TIMER_ID_RHYTHM, TIMER_TIME_RHYTHM, driver_rhythm_timer_cd);
		}
		//u_ag_timer_start(AG_TIMER_ID_RHYTHM, TIMER_TIME_RHYTHM, rhythm_timer_cd);
		
	}
	else
	{
		DRV_Mic_Disable();
		u_ag_timer_stop(AG_TIMER_ID_RHYTHM);
	}
}

void light_time_timer_start(void)
{
	u_ag_timer_start(AG_TIMER_ID_LIGHT_TIME, TIMER_TIME_LIGHT_TIME, alarm_time_task);
}

static void light_effect_timer_cb(void)
{
	static unsigned char i=0;
	switch (g_light_para.effect)
	{
		case LIGHT_EFFECT_JUMP:
		{
			light_mode_jump_timer_cb(&g_light_info);		
		}
			break;
		case LIGHT_EFFECT_GRADUAL:
		{
			light_mode_gradual_timer_cb(&g_light_info);
		}
			break;
		case LIGHT_EFFECT_BREATH:
		{
			light_mode_breath_timer_cb(&g_light_info);
		}
			break;
		case LIGHT_EFFECT_BLINK:
		{
			light_mode_blink_timer_cb(&g_light_info);		
		}
			break;
		
		default:
		{
			light_effect_timer_stop();
		}
			break;
	}

//	if (g_light_para.app_mode == LIGHT_APP_MODE_RC_AUOT)
//	{
//		rc_mode_auot_ctrl(0);
//	}


}

static uint16_t m_light_timeing = 0;
void light_effect_timer_start(uint16_t timing)
{
	if (timing != NULL)
	{
		m_light_timeing = timing;
	}
	u_ag_timer_start(AG_TIMER_ID_LIGHT_EFFECT, m_light_timeing, light_effect_timer_cb);
}

void light_effect_timer_stop(void)
{
	u_ag_timer_stop(AG_TIMER_ID_LIGHT_EFFECT);
}

void alarm_time_reach_cb(uint8_t execute_st)
{
	uint8_t reply_len = 0, alarm_st[24] = {0x00};
	#ifdef DEBUG_DRV_APP
	U_UART_PRINTF("alarm_time_reach_cb\n");
	#endif
	light_power_set(execute_st);
	light_state_upload();
	time_alarm_state_query(alarm_st, &reply_len);
	reply_app_encode(0x35, alarm_st, reply_len);
}


void u_init(void)
{
	sys_param_init();
	rc_init();
	power_check_init();
	light_info_init();
	light_time_init(); //闹钟
	app_mode_info_init();
	
	u_ag_timer_start(AG_TIMER_ID_GLO_TASK, TIMER_TIME_GLO_TASK, ag_timer_glo_task_cb); //红外
	u_ag_timer_start(AG_TIMER_ID_FLASH_SAVE, TIMER_TIME_FLASH_SAVE, light_flash_save_cb); //保存数据到flash
    mic_estimate_gpio_int();
	//u_ag_timer_start(AG_TIMER_ID_TEST, TIMER_TIME_LIGHT_TEST, ag_timer_test_cb);
  
}
//uint8_t g_speed = 0;

//void uart_recv_handle(uint8_t *uart_data, uint8_t recv_len)
//{
//	if (uart_data[0] == 0x55 && uart_data[1] == 0xAA)
//	{
//		
//		if (uart_data[2] == 0x01)
//		{
//			light_rhythm_enter(uart_data[3]);
//		}
//		else if (uart_data[2] == 0x02)
//		{		
//			//rhythm_sensit_ctrl(NULL, uart_data[3]);
//			g_speed = uart_data[3];
//		}
//		else if (uart_data[2] == 0x03)
//		{
//			app_rhythm_val_up(uart_data[3]);
//		}
//	}
//	
//	//U_UART_PRINTF("uart_recv %x\n", uart_data[2]);
//}