#ifndef __OLED_H
#define __OLED_H			  	 

#include "stdlib.h"	   
#include "stm32f10x.h"

#define OLED_MODE 0
#define SIZE 8
#define XLevelL		0x00
#define XLevelH		0x10
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xFF 
#define X_WIDTH 	128
#define Y_WIDTH 	64	    						  
//-----------------OLED IIC端口定义----------------  					   

#define OLED_SCLK_Clr() GPIO_ResetBits(GPIOB,GPIO_Pin_2)//SCL
#define OLED_SCLK_Set() GPIO_SetBits(GPIOB,GPIO_Pin_2)

#define OLED_SDIN_Clr() GPIO_ResetBits(GPIOF,GPIO_Pin_10)//SDA
#define OLED_SDIN_Set() GPIO_SetBits(GPIOF,GPIO_Pin_10)

 		     
#define OLED_CMD  0	//写命令
#define OLED_DATA 1	//写数据


//OLED控制用函数
void OLED_WR_Byte(unsigned dat,unsigned cmd);  
void OLED_Display_On(void);
void OLED_Display_Off(void);	   							   		    
void OLED_Init(void);//初始化SSD1306		
void OLED_Clear(void);//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!	  
void OLED_DrawPoint(u8 x,u8 y,u8 t);
void OLED_Fill(u8 x1,u8 y1,u8 x2,u8 y2,u8 dot);
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size);//在指定位置显示一个字符,包括部分字符
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size);
void OLED_ShowString(u8 x,u8 y, u8 *p,u8 Char_Size);//显示一个字符串 	 
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(u8 x,u8 y,u8 no);//显示汉字
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);
void Delay_50ms(unsigned int Del_50ms);
void Delay_1ms(unsigned int Del_1ms);
void fill_picture(unsigned char fill_Data);
void Picture();
void IIC_Start();
void IIC_Stop();
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);
void OLED_ShowString1(u8 x,u8 y,const char *p,char size);
void IIC_Wait_Ack();
void OLED_QRcode_Display(char *str,uint8_t offset,uint8_t colour);//二维码的内容和第一个点再X轴的位置 
void Show_Str_Fury(u16 x,u16 y,u16 width,u16 height,u8*str,u8 size);
void OLED_Refresh_Gram(void);//更新显存到OLED
void OLED_Refresh_Gram1(void);
#endif